How to deal with the unexpected situation of the highlighter during use? It depends on the specific situation.
1) Interference between the chuck and the workpiece: When an interference occurs, immediately press the "emergency stop switch" button on the machine tool to terminate the current processing, check whether the workpiece can be repaired, then re-clamp the tool and continue processing, generally after programming The listed processing technology list will give the length that the tool needs to extend. As long as the tool is selected and clamped according to the requirements, interference can be avoided;
2) Treatment of burrs: When burrs occur, immediately press the "emergency stop switch" button on the machine tool to terminate the current processing, check whether the workpiece is scrapped, and then run the spindle for about 2 hours according to the spindle break-in program. It is a relatively large trowel that occurs with a large tool. To check whether the accuracy of the machine tool is damaged, it is necessary to let the professional of the high-gloss machine manufacturer handle it.
3) Handling of broken tools: When the high light machine finds a broken tool, it must first pause the high light, then record the current processing path number, replace the tool, and find the previous position of the broken point, continue processing according to the starting number, and resume normal processing.